// JavaScript Document

// THIS IS THE JUMP MENU WHICH FUNCTION FOR THE UNTILITY BAR AT THE TOP OF THE PAGE
function MM_jumpMenu(targ,selObj,restore){ //v3.0
  eval(targ+".location='"+selObj.options[selObj.selectedIndex].value+"'");
  if (restore) selObj.selectedIndex=0;
}


function togglediv(id){

		if (document.getElementById(id).style.display == "none") {
			document.getElementById(id).style.display = "block";
		} else {
			document.getElementById(id).style.display = "none";
		}

	}

function textCounter(field, countfield, maxlimit) {
if (field.value.length > maxlimit) // if too long...trim it!
field.value = field.value.substring(0, maxlimit);
// otherwise, update 'characters left' counter
else 
countfield.value = maxlimit - field.value.length;
}


// EMAIL CHECKER
<!-- This script and many more are available free online at -->
<!-- The JavaScript Source!! http://javascript.internet.com -->

<!-- V1.1.3: Sandeep V. Tamhankar (stamhankar@hotmail.com) -->
<!-- Original:  Sandeep V. Tamhankar (stamhankar@hotmail.com) -->
<!-- Changes:
/* 1.1.4: Fixed a bug where upper ASCII characters (i.e. accented letters
international characters) were allowed.

1.1.3: Added the restriction to only accept addresses ending in two
letters (interpreted to be a country code) or one of the known
TLDs (com, net, org, edu, int, mil, gov, arpa), including the
new ones (biz, aero, name, coop, info, pro, museum).  One can
easily update the list (if ICANN adds even more TLDs in the
future) by updating the knownDomsPat variable near the
top of the function.  Also, I added a variable at the top
of the function that determines whether or not TLDs should be
checked at all.  This is good if you are using this function
internally (i.e. intranet site) where hostnames don't have to 
conform to W3C standards and thus internal organization e-mail
addresses don't have to either.
Changed some of the logic so that the function will work properly
with Netscape 6.

1.1.2: Fixed a bug where trailing . in e-mail address was passing
(the bug is actually in the weak regexp engine of the browser; I
simplified the regexps to make it work).

1.1.1: Removed restriction that countries must be preceded by a domain,
so abc@host.uk is now legal.  However, there's still the 
restriction that an address must end in a two or three letter
word.

1.1: Rewrote most of the function to conform more closely to RFC 822.

1.0: Original  */
// -->

<!-- Begin
function emailCheck (emailStr) {

/* The following variable tells the rest of the function whether or not
to verify that the address ends in a two-letter country or well-known
TLD.  1 means check it, 0 means don't. */

var checkTLD=1;

/* The following is the list of known TLDs that an e-mail address must end with. */

var knownDomsPat=/^(com|net|org|edu|int|mil|gov|arpa|biz|aero|name|coop|info|pro|museum)$/;

/* The following pattern is used to check if the entered e-mail address
fits the user@domain format.  It also is used to separate the username
from the domain. */

var emailPat=/^(.+)@(.+)$/;

/* The following string represents the pattern for matching all special
characters.  We don't want to allow special characters in the address. 
These characters include ( ) < > @ , ; : \ " . [ ] */

var specialChars="\\(\\)><@,;:\\\\\\\"\\.\\[\\]";

/* The following string represents the range of characters allowed in a 
username or domainname.  It really states which chars aren't allowed.*/

var validChars="\[^\\s" + specialChars + "\]";

/* The following pattern applies if the "user" is a quoted string (in
which case, there are no rules about which characters are allowed
and which aren't; anything goes).  E.g. "jiminy cricket"@disney.com
is a legal e-mail address. */

var quotedUser="(\"[^\"]*\")";

/* The following pattern applies for domains that are IP addresses,
rather than symbolic names.  E.g. joe@[123.124.233.4] is a legal
e-mail address. NOTE: The square brackets are required. */

var ipDomainPat=/^\[(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})\]$/;

/* The following string represents an atom (basically a series of non-special characters.) */

var atom=validChars + '+';

/* The following string represents one word in the typical username.
For example, in john.doe@somewhere.com, john and doe are words.
Basically, a word is either an atom or quoted string. */

var word="(" + atom + "|" + quotedUser + ")";

// The following pattern describes the structure of the user

var userPat=new RegExp("^" + word + "(\\." + word + ")*$");

/* The following pattern describes the structure of a normal symbolic
domain, as opposed to ipDomainPat, shown above. */

var domainPat=new RegExp("^" + atom + "(\\." + atom +")*$");

/* Finally, let's start trying to figure out if the supplied address is valid. */

/* Begin with the coarse pattern to simply break up user@domain into
different pieces that are easy to analyze. */

var matchArray=emailStr.match(emailPat);

if (matchArray==null) {

/* Too many/few @'s or something; basically, this address doesn't
even fit the general mould of a valid e-mail address. */

//alert("Email address seems incorrect (check @ and .'s)");
showdiv('email1');
return false;
}
var user=matchArray[1];
var domain=matchArray[2];

// Start by checking that only basic ASCII characters are in the strings (0-127).

for (i=0; i<user.length; i++) {
if (user.charCodeAt(i)>127) {
//alert("Ths username contains invalid characters.");
showdiv('email2');
return false;
   }
}
for (i=0; i<domain.length; i++) {
if (domain.charCodeAt(i)>127) {
//alert("This domain name contains invalid characters.");
showdiv('email3');
return false;
   }
}

// See if "user" is valid 

if (user.match(userPat)==null) {

// user is not valid

//alert("The username doesn't seem to be valid.");
showdiv('email4');
return false;
}

/* if the e-mail address is at an IP address (as opposed to a symbolic
host name) make sure the IP address is valid. */

var IPArray=domain.match(ipDomainPat);
if (IPArray!=null) {

// this is an IP address

for (var i=1;i<=4;i++) {
if (IPArray[i]>255) {
//alert("Destination IP address is invalid!");
showdiv('email5');
return false;
   }
}
return true;
}

// Domain is symbolic name.  Check if it's valid.
 
var atomPat=new RegExp("^" + atom + "$");
var domArr=domain.split(".");
var len=domArr.length;
for (i=0;i<len;i++) {
if (domArr[i].search(atomPat)==-1) {
//alert("The domain name does not seem to be valid.");
showdiv('email6');
return false;
   }
}

/* domain name seems valid, but now make sure that it ends in a
known top-level domain (like com, edu, gov) or a two-letter word,
representing country (uk, nl), and that there's a hostname preceding 
the domain or country. */

if (checkTLD && domArr[domArr.length-1].length!=2 && 
domArr[domArr.length-1].search(knownDomsPat)==-1) {
//alert("The address must end in a well-known domain or two letter " + "country.");
showdiv('email7');
return false;
}

// Make sure there's a host name preceding the domain.

if (len<2) {
//alert("This address is missing a hostname!");
showdiv('email8');
return false;
}

// If we've gotten this far, everything's valid!
document.contactform.emailvalid.value="valid";
return true;

}

//  End -->



//here you place the ids of every element you want.
var ids=new Array('a1','a2','a3','a4','a5','a6','a7','a8','a9','a10','a11','a12','a13','a14','a15','a16','a17','a18','a19','a20','a21','a22','a23','a24','a25','a26','a27','a28','a29','a30','a31','a32','a33','a34','a35','a36','a37','a38','a39','a40','a41','a42','a43','a44','a45','a46','a47','a48','a49','a50','a51','vtitle','vfirstname','vsurname','vhousenameno','vstreet','vtown','vcountycity','vemail','vcomments','email1','email2','email3','email4','email5','email6','email7','email8','vbrochures');
//here you place the ids of form fields names
var formids=new Array('title','firstname','surname','housenameno','street','town','countycity','email','comments');
var broopts = new Array('pensionsbro','investmentsbro','savingsbro','pridenjoybro','arfamrfbro','chargesbro');
/*

function switchid(id){	
	hideallids();
	showdiv(id);

}
*/
function hideallids(){
	//loop through the array and hide each element by id
	for (var i=0;i<ids.length;i++){
		hidediv(ids[i]);
	}		  
}

function checkforids(){
	//loop through the array and hide each element by id to check if they exist on the page, if they do hide the div , otherwise it doesn't do anything.
	for (var i=0;i<ids.length;i++){
	if (document.getElementById(ids[i]) != null)hidediv(ids[i]);
	
	}		
}

function hidediv(id) {
	//safe function to hide an element with a specified id
	if (document.getElementById) { // DOM3 = IE5, NS6
		document.getElementById(id).style.display = 'none';
	}
	else {
		if (document.layers) { // Netscape 4
			document.id.display = 'none';
		}
		else { // IE 4
			document.all.id.style.display = 'none';
		}
	}
}

function showdiv(id) {
	//safe function to show an element with a specified id
		  
	if (document.getElementById) { // DOM3 = IE5, NS6
		document.getElementById(id).style.display = 'block';
	}
	else {
		if (document.layers) { // Netscape 4
			document.id.display = 'block';
		}
		else { // IE 4
			document.all.id.style.display = 'block';
		}
	}
}

function clearbrochureoptions(){
	
	for (var i=0;i<broopts.length;i++)
	if (document.getElementById(broopts[i]).checked == true)
			{
				//alert(broopts[i]);
				document.getElementById(broopts[i]).checked = false;	
			
			}
	
	}

function validateForm()
{
	checkforids(); //this hides all current error messages
	
	
	// this 		shows the div that has the brochure selection if they have chosen yes, if this wasn't here checkforids() function hides it when the form is validated.


	
	
for (var i=0;i<formids.length;i++)
	{
	if (document.getElementById(formids[i]).value == '' || null )
			{
				showdiv('v' + formids[i]);
				document.getElementById(formids[i]).focus();//sets the focus to the invalid field
				return false;
				
			}
	}


if (document.getElementById('receivebrochure').checked == true)
	{  
	 if (document.getElementById('pensionsbro').checked == false && (document.getElementById('investmentsbro').checked == false)&& (document.getElementById('savingsbro').checked == false)&& (document.getElementById('pridenjoybro').checked == false)&& (document.getElementById('arfamrfbro').checked == false)&& (document.getElementById('chargesbro').checked == false))
			{
				//alert('you didn\'t select any brochure');
				showdiv('vbrochures')
				return false;
			
		}
		
		
		
	}
		

		


//alert('email check now');
if 	(document.getElementById('email').value != '' || null )
		{
		emailCheck(document.contactform.email.value);
		
		//return false;
	
		}
//emailCheck(document.contactform.email.value);


//alert ('email check finished');
	
if (document.contactform.emailvalid.value!="valid")
	{
	return false;
	}

else if (document.contactform.emailvalid.value=="valid")
	{
	//alert('document.contactform.submit();')
	//document.contactform.submit();
	return true;
	}
}




		

	
/*if (document.getElementById('title').value == '')
	{
		showdiv('vtitle'); 
		return false;
	}
else if (document.getElementById('firstname').value == '')
	 showdiv('vfirstname'); 
	 return false;
	}
	

if (document.getElementById('firstname').value == '')
	{
		showdiv('vfirstname') ;
		return false;
	}
	//else if (document.getElementById('firstname').value != '')
	//hidediv('vfirstname');
	
if (document.getElementById('surname').value == '')
	{
	showdiv('vsurname') ;
	return false;
	}
	//else if (document.getElementById('surname').value != '')
	//hidediv('vsurname');

if (document.getElementById('housenameno').value == '')
	{
		showdiv('vhousenameno');
		return false;
	}
	//else if (document.getElementById('housenameno').value != '')
	//hidediv('vhousenameno');

if (document.getElementById('street').value == '')
	{
		showdiv('vstreet') ;
		return false;
	}
	//else if (document.getElementById('street').value != '')
	//hidediv('vstreet');
	
if (document.getElementById('town').value == '')
	{
		showdiv('vtown') ;
		return false;
	}
	//else if (document.getElementById('town').value != '')
	//hidediv('vtown');	
	
if (document.getElementById('countycity').value == '')
	{
	showdiv('vcountycity') ;
	return false;
	}
	//else if (document.getElementById('countycity').value != '')
	//hidediv('vcountycity');


 document.contactform.submit();*/




<!--
// moock fpi [f.lash p.layer i.nspector]
// version: 1.3.5
// written by colin moock
// code maintained at: http://www.moock.org/webdesign/flash/detection/moockfpi/
// terms of use posted at: http://www.moock.org/terms/



// #############################################
// These are the user defined globals.
// Modify the following variables to customize the inspection behaviour.

var requiredVersion = 6;   // Version the user needs to view site (max 6, min 2)
var useRedirect = false;    // Flag indicating whether or not to load a separate
                           // page based on detection results. Set to true to
                           // load a separate page. Set to false to embed the
                           // movie or alternate html directly into this page.
                           
// Only set next three vars if useRedirect is true...
var flashPage = "movie.html"      // The location of the flash movie page
var noFlashPage = "noflash.html"  // Page displayed if the user doesn't have the
                                  // plugin or we can't detect it.
var upgradePage = "upgrade.html"  // Page displayed if we detect an old plugin

// #############################################



// *************
// Everything below this point is internal until after the BODY tag.
// Do not modify! Proceed to the BODY tag for further instructions.
// *************

// System globals
var flash2Installed = false;    // boolean. true if flash 2 is installed
var flash3Installed = false;    // boolean. true if flash 3 is installed
var flash4Installed = false;    // boolean. true if flash 4 is installed
var flash5Installed = false;    // boolean. true if flash 5 is installed
var flash6Installed = false;    // boolean. true if flash 6 is installed
var maxVersion = 6;             // highest version we can actually detect
var actualVersion = 0;          // version the user really has
var hasRightVersion = false;    // boolean. true if it's safe to embed the flash movie in the page
var jsVersion = 1.0;            // the version of javascript supported


// -->

<!--

// Check the browser...we're looking for ie/win
var isIE = (navigator.appVersion.indexOf("MSIE") != -1) ? true : false;    // true if we're on ie
var isWin = (navigator.appVersion.indexOf("Windows") != -1) ? true : false; // true if we're on windows

// This is a js1.1 code block, so make note that js1.1 is supported.
jsVersion = 1.1;

// Write vbscript detection on ie win. IE on Windows doesn't support regular
// JavaScript plugins array detection.
if(isIE && isWin){
  document.write('<SCR' + 'IPT LANGUAGE=VBScript\> \n');
  document.write('on error resume next \n');
  document.write('flash2Installed = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash.2"))) \n');
  document.write('flash3Installed = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash.3"))) \n');
  document.write('flash4Installed = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash.4"))) \n');
  document.write('flash5Installed = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash.5"))) \n');  
  document.write('flash6Installed = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash.6"))) \n');  
  document.write('</SCR' + 'IPT\> \n'); // break up end tag so it doesn't end our script
}
// -->

<!--
<!--

// Next comes the standard javascript detection that uses the 
// navigator.plugins array. We pack the detector into a function so it loads
// before we run it.

function detectFlash() {  
  // If navigator.plugins exists...
  if (navigator.plugins) {
    // ...then check for flash 2 or flash 3+.
    if (navigator.plugins["Shockwave Flash 2.0"]
        || navigator.plugins["Shockwave Flash"]) {

      // Some version of Flash was found. Time to figure out which.
      
      // Set convenient references to flash 2 and the plugin description.
      var isVersion2 = navigator.plugins["Shockwave Flash 2.0"] ? " 2.0" : "";
      var flashDescription = navigator.plugins["Shockwave Flash" + isVersion2].description;

      // DEBUGGING: uncomment next line to see the actual description.
      // alert("Flash plugin description: " + flashDescription);
      
      // A flash plugin-description looks like this: Shockwave Flash 4.0 r5
      // We can get the major version by grabbing the character before the period
      // note that we don't bother with minor version detection. 
      // Do that in your movie with $version or getVersion().
      var flashVersion = parseInt(flashDescription.charAt(flashDescription.indexOf(".") - 1));
     
      // We found the version, now set appropriate version flags. Make sure
      // to use >= on the highest version so we don't prevent future version
      // users from entering the site.
      flash2Installed = flashVersion == 2;    
      flash3Installed = flashVersion == 3;
      flash4Installed = flashVersion == 4;
      flash5Installed = flashVersion == 5;
      flash6Installed = flashVersion >= 6;
    }
  }
  	
	// loop through all versions we're checking, and set actualVersion to highest detected version
	for (var i = 2; i <= maxVersion; i++) {	
		if (eval("flash" + i + "Installed") == true) actualVersion = i;
	}
	// if we're on webtv, the version supported is 2 (pre-summer2000, or 3, post-summer2000)
	// note that we don't bother sniffing varieties of webtv. you could if you were sadistic...
	if(navigator.userAgent.indexOf("WebTV") != -1) actualVersion = 2;	
	
	// uncomment next line to display flash version during testing
	// alert("version detected: " + actualVersion);


	// we're finished getting the version. time to take the appropriate action

	if (actualVersion >= requiredVersion) { 		// user has a new enough version
		hasRightVersion = true;						// flag: it's okay to write out the object/embed tags later

		if (useRedirect) {							// if the redirection option is on, load the flash page
			if(jsVersion > 1.0) {					// need javascript1.1 to do location.replace
				window.location.replace(flashPage);	// use replace() so we don't break the back button
			} else {
				window.location = flashPage;		// otherwise, use .location
			}
		}
	} else {	// user doesn't have a new enough version.
	
		if (useRedirect) {		// if the redirection option is on, load the appropriate alternate page
			if(jsVersion > 1.0) {	// need javascript1.1 to do location.replace
				window.location.replace((actualVersion >= 2) ? upgradePage : noFlashPage);
			} else {
				window.location = (actualVersion >= 2) ? upgradePage : noFlashPage;
			}
		}
	}
}


detectFlash();	// call our detector now that it's safely loaded.	
	
// -->